A concrete driveway, parking lot, patio or sidewalk is an investment designed to last a lifetime provided a qualified contractor follows proper procedures to ensure a satisfactory job.

The following procedure should be used for a successful concrete driveway application:

• Determine the minimum & desired thickness depending on use (example: are you parking a car or large heavy truck?)
• Prepare the site with a competent, uniform and compact subgrade.
• Prepare an acceptable level of slope away from building.
• Plan your Labour & Material requirements. Ensure adequate tools and labour will be on hand. Speak to your ready-mix supplier for type of concrete required and provide at least 24 hours advance notice of your requested delivery.
• Place concrete using appropriate tools and taking into consideration weather conditions. (example: during cold weather, longer time is required before performing final finish.)
• Cure and Seal.
• Saw-Cut Control Joints as soon as possible.

The above is a summary only and not intended to be instructional or complete.
For detailed information regarding the proper and professional placing and finishing of a concrete driveway, parking lot, patio or sidewalk visit The Ready Mixed Concrete Association of Ontario site.